GS2 2 Channel Video Web Server

The G-Series is a 2 CH Video Web Server that can connect to the Internet via IP address. This revolutionary product transforms any DVR into an IP Web-server and any camera into an IP Camera, with full remote-control features over the Internet. This is a simple, intelligent, cost-effective solution. It is also possible to record video remotely. This web-server supports Alarm Inputs/Outputs (unit can send an Email with a picture, or upload to an FTP website upon alarm detection).

FEATURES:

• Compatible with most of CCTV Products; empower any video output device watching and controlling on the Internet or LAN.
• Auto Network Reconnection (ANR).
• Watch dog function supported.
• Support Dynamic IP address via a Router.
• 4 alarm inputs supported.
• Duplex function, record and playback simultaneously at client site.
• Auto e-mail warning system & images uploading function (to FTP site) that will remind you if external alarm happened.
• Intelligent non-stoppable recording function after ANR.
• Multi AP screens and HTTP display (IE browser) supported.
• Unique video player.
• User-friendly interface.

TECHNICAL SPECIFICATIONS:

• MODEL G-Series Web Server (GS2)
• Video Input 2 Channels,1.0 Vp-p, 75, Composite, BNC,
• Network Interface Ethernet (10/100 Base-T)
• Image Compression JPEG
• Video Adjustment Brightness, Contrast, Saturation, Quality Level adjust
• Protocols TCP/IP, ICMP, HTTP, SMTP, DHCP
• Hardware CPU: 16 Bits RISC Processor
• ROM: 512K Bytes Flash ROM
• RAM: 8M Bytes SDRAM
• One RJ-45 for 10/100 Mbps Ethernet
• LED to indicate Link / Act status
• GPIO with triggers for E-mail or FTP site
• Resolution VGA: 640x480, QVGA: 320x240
• Performance Video through put : Up to 15(NTSC), 12.5(PAL) frames/ second.
• Trigger & Action Triggered by GPIO Inputs
• Action: E-mail images or images uploading to FTP site's specific accounts
• Installation Assign Static IP address
• Software Upgrade Local or Remote software upgradeable
• RS-485 Port